In June 2019, the installation and commissioning of inclined lifts for disabled people INVALIFT was completed. This lift, manufactured by INVAPROM, is distinguished by its reliable design, inexpensive cost and simple operation.
The maximum platform capacity is 225 kg. To move the passenger, there are both control panels on the racks at the upper and lower stops, and a control panel on the platform itself. The waterproof design of the lift allows it to be operated in outdoor conditions, as well as at negative temperatures.

The inclined lift for the disabled is equipped with a safety surface that prevents hitting an obstacle that may occur under the platform while driving. The presence of such a function is mandatory, especially in places where other people use the stairs simultaneously with the movement of the platform. If a foreign object gets under the platform, any further movement is blocked until the obstacle is removed. This important option will save the health of others, as well as extend the service life of the device, preventing damage to the mechanism.

Also, the INVALIFT is equipped with safety ramps that block the movement of the platform if a passenger in a wheelchair runs over one of the fences. The equipment with this function eliminates the fall and injury of the passenger.
For self-control of movement, the platform has buttons for constant pressing. If the passenger releases the button for some reason, the platform will stop and continue moving only after the button is pressed again.
In all cases of an emergency stop, the lift emits a sound signal that helps to control the movement process.